Standard Razors June 2017 Update

Hello customers, fans, and friends of Standard Razors! It has been a while since our last update, so we wanted to say hi and let you know what's going on with Standard Razors. While it may not appear so from the outside, we are busy behind the scenes working on some new products which we hope to launch later this year. If you're not subscribed to our newsletter - make sure you sign up here so you get all of our announcements first. Now, onto the news that we can share:

- We have made some revisions to our website - including an updated homepage, a new frequently asked questions (FAQ) page located here, and some updated product imagery. All of these updates were performed with the hope of providing a better experience for you, our customers, so if you have any comments or suggestions for how we can further improve - please let us know! We'll be making further adjustments and refinements as time goes on, but we are open to your feedback. 

- If you have purchased one of our Standard Razors we recommend you glue the screw into the top cap. Just a small amount of glue should work, but this will prevent the screw from unthreading from the top cap and potentially being lost. If you purchased your razor from StandardRazors.com in 2017,this won't apply, as we have glued all the screws into the top cap since the beginning of this year. Again, if you have any questions, please reach out!

- We have heard from some customers that their screw has been in their handle for years and has worked flawlessly this way. If that's your situation - then there's no need to change - just be careful when you screw the top cap in as it's not as strong as the handle and you risk damaging your razor!

That's all for now - but as always, thanks so much for your support!

Happy Shaving!